How to Assemble Your Tabletop Flag Stand

Step 1 — Extend the Pole

Gently pull the telescopic pole outwards to extend it to the maximum length.

Step 2 — Remove the Pole Tip

Unscrew the decorative top piece from the end of the pole.

Step 3 — Insert the Pole Into the Flag

Slide the pole through the flag pocket at the side of the flag.

Step 4 — Secure the Flag if Needed

As each flag is individually sewn, some flag pockets may fit slightly looser than others.
Please use the golden thread loop attached to the golden clip on the flag to secure the flag on the top piece.

Step 5 — Reattach the Pole Tip

Screw the decorative top piece back onto the pole to secure the flag.

Step 6 — Attach the Pole to the Base

Screw the bottom of the pole into the glass base until secure.

Step 7 — Final Adjustment

Adjust the height of the telescopic pole as desired and straighten the flag for display.